+
How to replace a GU10 bulb:
1. Squeeze the clip (or use sucker provided) to release the bulb from the fitting
2. Turn bulb counter clockwise to ‘unhook’ from the power supply
3. Twist new bulb clockwise into position
4. Replace clip
How to use and store LED beads correctly
Innotech
Innotech
2018-08-09 14:43:26
LED, as we all know, is Light emitting bond.LED lamp bead is actually the English abbreviation LED of LED, which is a relatively popular name. Next, how to store and use LED lamp beads for everyone!
When the operator touches the LED lamp bead, he must wear a bracelet that can effectively prevent static electricity. On the working desktop, we must put on the anti-static rubber to make it safer.
For LED lamp beads, do not form during or after welding. The forming step must be completed before welding. It should also be noted that any action that squeezes the resin may damage the pure copper wire inside the LED, so be careful.
When welding, the solder joint should have at least 2 mm clearance from the lower edge of the colloid. After the soldering is completed, we need three minutes to return the LED from the high temperature state to the normal temperature state. It is important to pay special attention to the fact that the gel must not be immersed in the solder.
LED lamp beads should be stored in a dry and ventilated environment with a relative humidity of 85% or less. Before opening the seal, it is best to use it in three months to prevent rust. If the package is opened, try to use it as soon as possible, and keep the relative humidity below 60%.（LED lighting supplier and manufacturer China）
When cleaning led, do not use chemical cleaning with uncertain ingredients, as chemicals may damage the surface of the LED resin. The best way to handle it is to immerse the led in alcohol at room temperature for cleaning. The cleaning time is about one minute.
In short, the use and storage of led lamp beads is very important, we must pay attention to handling all the details, so that it is safer!