+
Here are a few things to consider when choosing LED light bulbs...
Efficiency, Colour Temperature, Colour Rendering, Heat Output, lifetime, etc.
How to do led light strip pse authentication, what standards do you need to meet?
2018-11-07 09:56:56
LED strips (also known as LED strips or strips of light) are flexible boards that emit light by filling surface-mounted light-emitting diodes (SMD LEDs) and other components, typically for adhesive backing. Traditionally, strip lights have only been used for accent lighting, backlighting, work lighting and decorative lighting applications. SMDs that increase luminous efficiency and higher power make LED strips for high-intensity work lighting, fluorescent and halogen fixture replacement, indirect lighting applications, UV applications, etc.
tubular bulb manufacturer in china
Led light bar PSE certification standards: JISC8105, J55015
LED lamps exported to Japan mainly have special requirements on the chip side and power supply:
First, the power supply. The power supply must be a power supply to be isolated, because the non-isolated power supply can not pass the certification test at all, especially the external voltage supply of the withstand voltage test (International Standard 4U+2000v) in the safety regulations, the diamond power supply is required. . It is mandatory.
Second, the lamps exported to Japan have great requirements for chips and phosphors. A chip patent with a Japanese-related agreement is required, or a local Japanese one.
Led light bar PSE certification standard JISC8105 detailed:
This standard is a Japanese industrial standard used to regulate the performance requirements of lighting equipment and the general requirements for delivery inspection items:
The standard was promulgated in 1999 and was reached today after revision. The latest revision was completed in 2006 but it has been revised to address subsequent technological advancements. In the IEC standard, as a safety-related standard, IEC 60598-1 (Lamps - Part 1: General requirements and tests), and IEC 60598-2 (Lamps - Part 2: Special requirements) standard group, but Performance requirements This IEC standard has not been established at this time.
decorative tubular LED filament bulb factory
JISC8105 application range: This standard is an electric light source with a power supply voltage of 1000V or lower (incandescent bulbs, fluorescent lamps, other discharge lamps, LEDs such as electron emitters. Hereinafter, referred to as a light source (hereinafter referred to as "lighting device").Performance requirements, test methods and inspection of LED lighting fixtures. According to individual product standards, if individual product standards for lighting equipment provide the same items as this standard.
Note: Examples of items not included in the general lighting device mentioned here are as follows.
china COB GU10 LED Spotlights suppliers
1. For places with constant ambient temperature, especially high temperature or low temperature b for places with a lot of dust;
2. For places with corrosive gases, etc.;
3. Used in places such as flammable gases;
4. Things used in violent places;
5. Things after sinking in the water;
6. Lamps for vehicles and signal lights;
7. Emergency luminaires according to the Building Standards Act and induction luminaires according to the Fire Protection Act;
8. Lights for aircraft take-off and landing and aircraft faulty lights;
9. Medical lighting equipment;
10. Lighting device for loading machines, furniture, etc.;
11. Photographic lamps.