2018 Hong Kong International Lighting Fair
Giant LED Filament bulbs
Giant Flexible LED Filament Bulbs
Vintage LED Filament Bulbs
LED String Lights
Home > Products > LED Panel lights and Panel downlights > Slim Square Recessed LED Panel.....
Slim Square Recessed LED Panel downlight 12WSlim Square Recessed LED Panel downlight 12WSlim Square Recessed LED Panel downlight 12WSlim Square Recessed LED Panel downlight 12WSlim Square Recessed LED Panel downlight 12W
  • 1
  • 2
  • 3
  • 4
  • 5

Slim Square Recessed LED Panel downlight 12W

  • Type: LED Panel downlights
  • Power: 12 watts
  • Input Voltage: 175-265VAC or 85-265VAC, 50/60Hz
  • Luminous Flux: 800lm ± 10% 
  • Light Beam Angle: 120 degree
  • Color Temperature: 2700K - 6500K
  • Dimmable: available
  • Power Factor: >0.50
  • Mounting Option: Recessed
  • Lifespan: Up to 25,000 hours
  • Warranty: Two years limited warranty based on average daily use of 4 hours
  • Application: Living room, bedroom, kitchen, conference, meeting room, show room, showcase, school, university, hospital, hotel, supermarket, department store, etc.

Product Description


With diffused, uniform and comfortable illumination effects, Innolite slim square recessed LED Panel downlights is a new upgrade replacement for all traditional recessed&surface luminaries, troffer and downlights in office, conference, school, living room and kitchen, etc.

With ultra thin design, this 1 inch thickness LED panel downlight makes the ceiling flat and perfectly embedded in the ceiling. With super brightness and high quality SMD LED chips, the lifetime of this panel downlight is over 25,000 hours to reduce hassle of frequently replacing ceiling LED lights in high ceiling. Unlike the traditional CFL lights, it is environment friendly without IR and UV radiation, mercury free.


Product Specification

 Model No. 31245
 Power 12W
 Finishing White or Satin Nickel
 Luminous Flux 800lm ± 10%
 Mounting Option Recessed
 Input Voltage 175-265VAC or 85-265VAC
 Color Temp (CCT) 2700K - 6500K
 Energy Efficiency Class A+
 Beam Angle 120 degree
 Color Rendering Index >80 Ra
 Power factor >0.50
 Start Time <0.5S
 Switching Cycle ≥12,500
 Life time Up to 25,000 hours
Temp. Of Operation -20° C to 40°C
 Dimension 170x170mm 
 Cutout Size 155x155mm

  
Product Certificates



Related Products

Model No. Wattage   Finishing Luminous Flux  Mounting Option Dimension 
31241  3W  White/ Satin Nickel 200lm ± 10%  Recessed 85x85mm
31242 4W   White/ Satin Nickel  280lm ± 10%   Recessed 105x105mm 
31243 6W   White/ Satin Nickel    400lm ± 10%   Recessed 120x120mm 
31244 9W   White/ Satin Nickel  600lm ± 10%   Recessed 145x145mm 
31246 15W   White/ Satin Nickel  1000lm ± 10%   Recessed 200x200mm 
31247  18W   White/ Satin Nickel 1200lm ± 10%   Recessed 225x225mm 
31248  20W    White/ Satin Nickel  1300lm ± 10%   Recessed 240x240mm 
31249  24W   White/ Satin Nickel   1600lm ± 10%   Recessed 300x300mm


Product show

china square led recessed LED panel light supplier

Advantages

² High brightness 100lm/w
² Thin and strong aluminum alloy frame structure and not easily deformed
² Easy and quick installation to save labor costs
² No flicker to protect human eyes
² High CRI > 80 ensures more vivid and natural light
² Environment friendly: No lead or mercury and No UV or IR Radiation
² Long life time lasts up to 10 years (4 hours use per day)
² Dimmable
² Two years limited warranty based on average daily use of 4 hours
² With certification of CE RoHS TUV, etc.

Application

Living room, bedroom, kitchen, conference, meeting room, show room, showcase, school, university, hospital, hotel, supermarket, department store, etc.

Attention Please,

*If you want to install panel led lights in bathroom, please NOT in shower place, but in dry side.
*As their Size, please be careful about size, it have front and back size. Your CUT-HOLE Size CAN'T overtake its Front Size.

How to install it?

1)First install two spring loaded clips in ceiling downlights
2)Connect power supply with household electrical wire(We have updated the power supply)
3)Put ceiling lights into the hole
4)The spring loaded clip automatically clasp the ceiling, finish.

 
Operation and maintenance

² Ambient temperature range -20° C to 40°C.
² Store and use the bulb/lamp the same way as traditional bulb/lamp.
² Check your fixtures are properly wired and don’t deliver voltage spike to bulb/lamp causing overheating/failure.
² Bulb/lamp should be kept free from contamination.
² Good condition of the lamp-holder contacts is important to ensure proper operation of bulb/lamp.
² Switch off mains supply before installing or removing bulb/lamp.
² Ensure bulb/lamp is cool before removing.

Warning: Discontinue use if damaged.


Package

1 pc led bulb per color box, then 20pcs packed in one standard export carton.(1pc/color box,20pcs/carton) 


Return Policy

We provide a free TWO YEARS LIMITED WARRANTY based on average daily use of 4 hours for this item.
Should returns be required:
Step 1) Contact us with this website email.
Step 2) Provide as much detail as possible about the problem you are having.
Step 3) Authorization to return the item will be issued.
Step 4) Return the item for the agreed replacement or refund. 

FAQ

Q1.Are you a manufacturer?
A1: Yes, we are an experienced manufacturer with our own molds and production lines.
 
Q2.How about quality of products?
A2: Our technicians and QC teams test the products one by one using aging line, professional devices and instruments to ensure the quality for all products.
 
Q3.How about price?
A3: We are a manufacturer and always offer our customers the most competitive prices.
 
Q4.How to place an order?
A4: Contact with online service, or sent email to us directly, we will reply to you with product price, specifications, packing etc. soon. Thank you.
 
Q5.May I buy samples from you? 
A5: Yes! You are welcome to place sample order to test our superior quality and service, mixed samples are acceptable.
 
Q6.Can I visit your factory?
A6: Yes, welcome to visit our factory at your convenient time.
 
Q7.How can I make OEM or ODM orders?
A7: We have different print processing for different OEM/ODM orders. Please contact us with online service or send email to us directly.
 
Q8. How should I pay for my orders?
A8: You can pay by T/T, L/C at sight would be available for qualified bank and MOQ required for each order.


Innotech Industrial Co.,Ltd.

Tel:+86-18938659461

Contact Person:Zoe

Send your inquiry directly to us
show code on cursor in the input box
( 0 / 3000 )