+
Here are a few things to consider when choosing LED light bulbs...
Efficiency, Colour Temperature, Colour Rendering, Heat Output, lifetime, etc.
Which five major factors will affect the life of LED lights?
Innotech
Innotech
2018-03-01 14:37:41
If you use a light source for a long time, you get huge economic benefits and a reduced carbon footprint. Depending on the system design, flux reduction is a normal process, but negligible. When the luminous flux decreases very slowly, the system stays in good shape without long maintenance.
LED(dimmable LED light bulbs) lights are undoubtedly superior to other light sources in many applications. In order to maintain the good state of the system, you need to consider the following five factors.
effectiveness
LED lamps and LED modules are manufactured and driven within a specific current range. According to its characteristics, it can provide LED current from 350mA to 500mA. Many systems are driven in the high numerical range of this current range.
Acidic conditions
Under some acidic conditions, LED(Vintage LED bulbs wholesales) lights can also be easily affected, for example, in coastal areas where salt content is high, in factories that use chemicals or make products, or in indoor swimming pools. Although LEDs are also manufactured for these areas, they must be carefully encapsulated into a fully enclosed enclosure with a high level of IP protection.
Heat
Heat can affect the LED flux and life cycle. Radiator to avoid system overheating. System heating means that the allowable ambient temperature of the LED lamp is exceeded. LED life depends on the ambient temperature.
Mechanical stress
When manufacturing, stacking, or simply manipulating LEDs, mechanical stress can also affect the life of the LED(China Giant LED Filament Bulb manufacturer) lamp, sometimes completely destroying the LED lamp. Pay attention to Electrostatic Discharge (ESD) as this can result in short but high current pulses that can damage LEDs and LED drivers.
Humidity
The performance of LEDs also depends on the ambient humidity. Because in humid environments, electronic equipment, metal parts, etc. tend to be quickly damaged and begin to rust, so try to make the LED system to avoid moisture.